Lincoln Navigator: Parking Aid / Specifications
General Specifications - Rear Parking Aid
| Item | Specification |
|---|---|
| Test object position 1 (P1) and position 5 (P5), distance from rear bumper | 25 cm (10 in) |
| Test object position 2 (P2) and position 4 (P4), distance from rear bumper | 50 cm (20 in) |
| Test object position 3 (P3), distance from rear bumper | 150 cm (59 in) |
General Specifications - Front Parking Aid
| Item | Specification |
|---|---|
| Test object position 1 (P1) and position 5 (P5), distance from front bumper | 20 cm (8 in) |
| Test object position 2 (P2) and position 4 (P4), distance from front bumper | 36 cm (14 in) |
| Test object position 3 (P3), distance from front bumper | 60 cm (24 in) |
Parking Aid
..
Parking Aid - Component Location. Description and Operation
Item
Description
1
Rear parking aid sensors
2
Parking aid switch/active park assist switch
3
IPMA
4
Front active park assist sensors
5
Front parking aid sensors
6
Front speakers
7
Rear speakers
8
Rear active park assist sensors
..
Other information:
Lincoln Navigator 2018-2024 Workshop Manual: Side Obstacle Detection Control Module D (SODCMD). Removal and Installation
Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). Disconnect the electrical connector, retainer and position aside the wiring harness. Remove the screw and SODCMD brack..
Lincoln Navigator 2018-2024 Workshop Manual: Stay in Neutral - No Start. General Procedures
Activation NOTE: The following steps should be used when the engine will crank but not start. NOTE: If the vehicle has a discharged battery, an external power source is required. If the battery discharges while in Stay in Neutral Mode, the Park Lock Pawl Solenoid will release and transmission will return to Park. Do not tow the vehicle in this mode. Apply the..
Categories
- Manuals Home
- 4th Gen Lincoln Navigator Service Manual (2018 - 2024)
- Body Control Module (BCM). Removal and Installation
- Transmission Fluid Level Check. General Procedures
- Rear View Mirrors - System Operation and Component Description. Description and Operation
- All Terrain Control Module (ATCM). Removal and Installation
- Front Bumper. Removal and Installation
Front Driveshaft. Removal and Installation
Special Tool(s) / General Equipment
Crimping ToolMaterials
Name Specification Motorcraft® Premium Long-Life GreaseXG-1-E1 ESA-M1C75-B
Removal
With the vehicle in NEUTRAL, position the vehicle on a hoist.Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
Remove the bolts and the transmission shield.
