Removal
NOTE: If installing a new module, it is necessary to upload the module configuration information to the diagnostic scan tool prior to removing the module. This information must be downloaded into the new module after installation.
NOTE: Removal steps in this procedure may contain installation details.
Using a diagnostic scan tool, begin the PMI process for the driver status monitor camera module following the on-screen instructions.![]() |
![]() |
![]() |
Installation
Removal
NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
NOTE: Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.NOTICE: Do not use power tools to remove or install the stabilizer bar