Lincoln Navigator: Wipers and Washers / Windshield Washer Pump. Removal and Installation
Special Tool(s) /
General Equipment
Materials
Name |
Specification |
Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2 |
WSS-M14P19-A
|
Removal
-
Open the windshield washer reservoir lid.
-
Siphon the windshield washer fluid.
Use the General Equipment: Fluid Suction Gun
-
Remove the RH fender splash shield.
Refer to: Fender Splash Shield (501-02)
.
-
Disconnect the washer pump electrical connector.
-
Detach the washer pump hoses.
-
Remove the windshield washer pump.
Installation
NOTICE:
Do not operate the washer pump prior to filling the
windshield washer reservoir. Failure to follow this instruction may
result in premature pump failure.
-
To install, reverse the removal procedure.
Material: Motorcraft® Premium Windshield Wash Concentrate with Bitterant
/ ZC-32-B2
(WSS-M14P19-A)
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the cowl panel grille.
Refer to: Cowl Panel Grille (501-02 Front End Body Panels, Removal and Installation)...
Special Tool(s) /
General Equipment
Fluid Suction Gun
Materials
Name
Specification
Motorcraft® Premium Windshield Wash Concentrate with BitterantZC-32-B2
WSS-M14P19-A
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
Removal
NOTICE:
During the removal or installation of components, cap, tape
or otherwise appropriately protect all openings and tubes/fittings to
prevent the ingress of dirt or other contamination. Remove caps, tape
and other protective materials prior to installation...
Special Tool(s) /
General Equipment
308-250
(T96T-7127-B)
Installer, Output Shaft Oil SealTKIT-1996-F/FMTKIT-1996-FLM2
Adjustable Mounting Arm
Spatula
Materials
Name
Specification
Motorcraft® Ultra Silicone SealantTA-29
WSS-M4G323-A8
Removal
Remove the transfer case...