Lincoln Navigator: Information and Entertainment System - General Information - Vehicles With: SYNC 4 / Media Hub. Removal and Installation
Removal
-
Open the media bin.
-
Release the tabs and position the media hub out.
-
Disconnect the electrical connectors and remove the media hub.
Installation
-
To install, reverse the removal procedure.
Removal
Remove the APIM .
Refer to: Information and Entertainment System - Component Location
(415-00 Information and Entertainment System - General Information -
Vehicles With: SYNC 4, Description and Operation)...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Lower the headliner.
Refer to: Headliner - Lowering (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Other information:
Materials
Name
Specification
Plastic Bonding AdhesiveTA-9
-
Repair
NOTICE:
Plastic repairs on vehicles equipped with Advanced Driver
Assistance System (ADAS) must not exceed 12 mils (300 microns) of paint
thickness after refinishing...
Special Tool(s) /
General Equipment
6.5 mm Drill Bit
Scraper for Straight Edges
Polydrive Bit Socket
Rivet Gun
Self-Piercing Rivet (SPR) Remover/Installer
Belt Sander
Hot Air Gun
Locking Pliers
Materials
Name
Specification
Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 505..