Lincoln Navigator: Bumpers / Front Bumper. Removal and Installation
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
-
Remove the front bumper nuts.
Torque:
66 lb.ft (90 Nm)
-
Remove the front bumper.
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the front wheels and tires.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation)...
Other information:
Special Tool(s) /
General Equipment
6.5 mm Drill Bit
Self-Piercing Rivet (SPR) Remover/Installer
Belt Sander
Blind Rivet Gun
Locking Pliers
Materials
Name
Specification
Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055
-
Removal
NOTE:
The following procedure details re..
Overview
The handles, locks, latches, and entry systems consist of the following:
Main Components:
BCM
DDM
Door latches
Door lock control switches
Door lock indicators
Exterior door handles containing lock/unlock sensors
Fuel filler door lock actuator (if equipped)
Fuel filler door release switch (if equipped)
..