Lincoln Navigator: Seatbelt Systems / Third Row Center Seatbelt Retractor - Long Wheelbase. Removal and Installation
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Lower the headliner.
Refer to: Headliner - Lowering (501-05 Interior Trim and Ornamentation, Removal and Installation).
-
Remove the bolts and the third row center seatbelt retractor.
Torque:
30 lb.ft (40 Nm)
Installation
NOTE:
During installation, make sure the seatbelt webbing is not
twisted and the seatbelts and buckles are accessible to the occupants.
-
To install, reverse the removal procedure.
-
Check the seatbelt system for correct operation.
Refer to: Seatbelt System Functional Tests (501-20A Seatbelt Systems, General Procedures).
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Left-hand (LH) shown, right-hand (RH) similar.
NOTE:
Short wheel base shown, long wheelbase similar...
Special Tool(s) /
General Equipment
Flat-Bladed Screwdriver
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
System Operation
Item
Description
1
BCM
2
Sliding Glass Motor
3
Roof Opening Panel Control Switch
4
Shield Motor
5
K Bus (not used for external communication)
Switch Operation
There are three switches located in the overhead console...
Removal
Remove the third row seat head restraint guide sleeves.
Refer to: Third Row Seat Head Restraint Guide Sleeve (501-10C Third Row Seats, Removal and Installation).
Remove the third row double seat backrest cover and foam as an assembly...