Lincoln Navigator: Electronic Engine Controls - 3.5L EcoBoost (272kW/370PS) / Turbocharger Bypass Valve. Removal and Installation
Removal
NOTE:
When removing any turbocharger air intake system
components, make sure to cover any open ports to prevent debris from
entering the system. The turbocharger compressor vanes can be damaged by
even the smallest particles. All components need to be inspected and
cleaned prior to installation or reassembly.
NOTE:
Removal steps in this procedure may contain installation details.
-
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
-
-
Release the clip and disconnect the CAC outlet pipe.
-
Disconnect the quick connect coupling at the turbocharger bypass valve.
Refer to: Quick Release Coupling (310-00)
.
-
Disconnect the electrical connector, remove the retainers and the turbocharger bypass valve.
Torque:
53 lb.in (6 Nm)
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Lubricate the O ring with clean engine oil...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the RH valve cover.
Refer to: Valve Cover RH (303-01 Engine - 3...
Other information:
Overview
Item
Description
1
TCC solenoid
2
TCC regulator valve assembly
3
TCC apply circuit
4
TCC release circuit
Torque Converter Hydraulic Circuits (TCC Released)
Ite..
Special Tool(s) /
General Equipment
Electric Drill
Punch
Vacuum Cleaner
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the roof opening panel fixed glass.
Refer to: Roof Opening Panel Fixed Glass (501-17 Roof Opening Panel, Removal and Installation).
NOTICE:
Make sure the tensio..