Lincoln Navigator: Electronic Engine Controls - 3.5L EcoBoost (272kW/370PS) / Variable Camshaft Timing (VCT) Oil Control Solenoid. Removal and Installation
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the RH valve cover.
Refer to: Valve Cover RH (303-01 Engine - 3.5L EcoBoost (272kW/370PS), Removal and Installation).
-
Remove the bolts and the RH
VCT oil control solenoids.
Torque:
89 lb.in (10 Nm)
-
Remove the LH valve cover.
Refer to: Valve Cover LH (303-01 Engine - 3.5L EcoBoost (272kW/370PS), Removal and Installation).
-
Remove the bolts and the LH
VCT oil control solenoids.
Torque:
89 lb.in (10 Nm)
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
When removing any turbocharger air intake system
components, make sure to cover any open ports to prevent debris from
entering the system...
Other information:
Special Tool(s) /
General Equipment
205-142
(T80T-4000-J)
Installer, Differential Bearing Cone
205-153
(T80T-4000-W)
Handle
303-1247VCT Spark Plug Tube Seal Remover and InstallerTKIT-2006UF-FLMTKIT-2006UF-ROW
Materials
Name
Specification
Motorcraft® High Performance Engine RTV SiliconeTA-357
WSE-M4G323-A6
Motorcra..
Inspection
If airbags deploy.
Refer to: Inspection and Repair after a Supplemental Restraint System (SRS) Deployment (501-20B)
.
NOTE:
Deployable devices such as airbags, pretensioners and
inflatable belt inflators, may deploy alone or in various combinations
depending on the impact event.
NOTE:
Always refer to the appropriate workshop manual procedures
p..