Lincoln Navigator: Fuel System - General Information / Fuel Tank and Lines - 3.5L EcoBoost (272kW/370PS)
Disconnect
NOTICE:
When reusing liquid or vapor tube connections, make sure to
use compressed air to remove any foreign material from the connector
retaining clip area before separating from the tube or damage to the
tube or connector retaining clip may occur...
System Operation
Fuel Systems
The fuel system supplies the fuel injectors with clean fuel at a
controlled pressure. The PCM controls the fuel pump and monitors the
fuel pump circuit...
Other information:
Removal
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
Upload the Direct Current/Direct Current (DC/DC)
configuration to the scan tool by following the scan tool on-screen
instructions...
Special Tool(s) /
General Equipment
303-1567Sizer, Teflon SealTKIT-2010C-FLM
307-005
(T59L-100-B)
Slide Hammer
310-205Fuel Injector Brush
310-206Remover, Fuel InjectorTKIT-2009A-FLM
310-207Installer, Fuel Injector Seal AssemblyTKIT-2009A-FLM
Removal
Remove the port injection fuel rail...